| Professional Grade Yagi Antennas |
| Professional Grade Omni Antennas |
| Professional Grade Grid Antennas |
| Valu Series Yagi Antennas |
| Valu Series Omni Antennas |
| Connectors & Mounts |
| PROGRID403-15, 403-430 MHz, 15 dBi |
| PROGRID549-16, 549-609 MHz, 16.5 dBi |
| PROGRID806-18, 806-896 MHz, 18.5 dBi |
| PROGRID890-18, 890-960 MHz, 18.5 dBi |
| VALU450-8, 450-470 MHz, 8 dBi Gain |
| VALU450-12, 450-470 MHz, 12 dBi Gain |
| VALU890-8, 890-960 MHz, 8.6 dBi Gain |
| VALU890-12, 890-960 MHz, 12 dBi Gain |
| VALU890-14, 890-960 MHz, 14 dBi Gain |
| VALU750-8, 750-790, 8.5 dBi Gain |
| VALU902-5, 902-928, 5 dBi Gain |
| VALU902-8, 902-928, 8 dBi Gain |
| VALU928-8, 928-960, 8 dBi Gain |
745-806
MHz
PROFESSIONAL GRADE YAGI
PRO745-8
| Operating Frequency (VSWR ≤ 1.5) | 745-806 |
| Nominal Gain (dBi) | 8.5 |
| Horizontal Beamwidth (Deg-3dB) | 102 |
| Vertical Beamwidth (Deg-3dB) | 65 |
| Front To Back Ratio (dB) | 15 |
| Power Rating (W) | 200 |
| Length (inches) | 18 |
| Width (inches) | 7.5 |
| Antenna Weight (lbs.) | 1.5 |
| Cross Sectional Area (Max. Ft²) | 0.16 |
| Lateral Thrust at 100mph (lbs.) | 4 |
| Rated Wind Velocity (mph) | 150 |
| Rated Wind Velocity with 1/2'' radical (mph) | 120 |
PRO745-8 is equipped with 2' of LMR 400 UltraFlex® and N-Female connector.
Feed Line Options: Extended feed line available
in 5’ increments up to a
maximum of 50 '. All extended feed line antennas equipped with
LMR 400 cable and N-Male connector.
Includes mounting
bracket: C1001
Easily permits vertical or horizontal polarization. Mounts on 1"-2 3/8" OD pipe.
The PRO745-8 is engineered to meet or exceed the requirements of a broadband, high gain Professional Grade antenna.
This antenna provides 8.5 dBi gain and operates effectively across the operating range of 745-806 MHz with a VSWR of 1.5:1 or less.
All WaveLink Professional Grade antennas are manufactured using only high strength 6061-T6 aluminum and are fully welded to ensure optimum performance in the most severe operating conditions.
The dipole design incorporates an integral feed cable available in lengths up to 50', allowing ease of installation and ensuring long-term dependability.
The dipole and directive elements are fully welded to the boom so all potential intermod or misalignment problems are eliminated. The PRO745-8 is anodized to protect against environmental degradation.
